Neemem's Blog

钻石注册表修改及一些测试过的软件

neemem — Sat, 01 Nov 2008 23:25:29 +0800

**修改機內註冊表有一定的風險, 有機會影響手機的運作, 如要修改請先進行備份.

HKEY_CLASSES_ROOT：(HKCR) 用來放置一些資料的定義，如副檔名的關聯，資料的類別之類的東西。
HKEY_LOCAL_MACHINE：(HKLM) 此區是放置系統的設定，不論軟體或硬體都是放在這，如同它LOCAL MACHINE的含義一樣。
HKEY_CURRENT_USER：(HKCU) 用來存放使用者自己的一些資料，除非有寫程式，否則一般都是沒有在用的。
HKEY_USERS：這個區域是放置一些每個使用者共用的資料及設定，因為Windows Mobile依然架構是跟NT相近，有區分All User或User的分別，這裡就是紀錄這些東西。

修改註冊表要先安裝RESCO EXPLORER 內裡有一個程式叫(RESCO REGISTRY) 是可以修改機內的註冊表, 當然除在用RESCO, 還有其他的. 只不過我慣用是這個.

可以在程式集找到 - Resco Registry 又或者打開了 Resco Explorer , 亦都會見到My Registry

1.
開啟被隱藏五向控制鍵　雙重功效, 利用順時針或逆時針方向旋轉觸控來SCROLL UP & DOWN
[HKEY_LOCAL_MACHINE/Software/HTC/SmartTouch/]
新增Key ) MSContactsUI
新增String Value) Name = ClassName String = MSContactsUI
新增DWORD Value) Name = Mode DWORD Data= 4
新增DWORD Value) Name = WheelCount DWORD Data= 2
2.
開啟被隱藏　雙重功效,用五向控制鍵，利用順時針或逆時針方向旋轉觸控來SCROLL UP & DOWN
[HKEY_LOCAL_MACHINE/Software/HTC/SmartTouch/]
新增Key ) RescoExplorer
新增String Value) Name = ClassName String = RESCO_EXPLORER_CLASS
新增DWORD Value) Name = Mode DWORD Data= 4
新增DWORD Value) Name = WheelCount DWORD Data= 2

一样可以改其他软件用五向控制鍵利用順時針或逆時針方向旋轉觸控來SCROLL UP & DOWN，你要知道ClassName(一定要留意大小楷)的值, 才可以對該程式生效, 已知的如下:
( 其實找classname, 可以用 g-Sensor 程式的)

RescoPhotoViwer = RESCO_PICVIEW_CLASS
InternetExplorer = IExplore
檔案總管 = FEXPLORE
CorePlayer’s class = wCorePlayer
聯絡人=MSContactsUI
通話記錄=MSClog
SMS/MMS message=Inbox.MainWnd

另外WheelCount的值有以下的解說:
1 = Movement of one every 36 degrees
5 = Movement of one every 180 degrees
10 = Movement of one every 360 degrees

3.1 開啟被隱藏了的拍攝摸式

連拍:
[HKEY_LOCAL_MACHINE\Software\HTC\Camera\P6]
“Enable”=dword:00000001
運動:
[HKEY_LOCAL_MACHINE\Software\HTC\Camera\P8]
“Enable”=dword:00000001
影片共用:
[HKEY_LOCAL_MACHINE\Software\HTC\Camera\P9]
“Enable”=dword:00000001
GPS 相片摸式:
[HKEY_LOCAL_MACHINE\Software\HTC\Camera\P10]
“Enable”=dword:00000001

4.
4.隱藏simcard上的聯絡人資料
HKCU\ControlPanel\Phone
新增Dword ) Name : ShowSim
DWORD Data : 0

5.
5.不用耳筒, 直接進入音效增強器修改
HKLM/System/State/Hardware/Headset
DWORD Data : 1

6.
IE的暫存檔案改在內部儲存裡面
HKCU\Software\Micosoft\Windows\CurrentVersion\Explorer\Shell Folders
String Value Name : Cache       String : \內部儲存\Temp\ie\Temporary Internet Files
String Value Name : Cookies    String : \內部儲存\Temp\ie\Cookies
String Value Name : History    String : \內部儲存\Temp\ie\History

7.
解決來電延遲3秒(***因有c兄反應, 修改後有do do的聲音, 所以改與不改請自行決定)
HKCU\ControlPanel\Sounds\Dialing
Script=(修改值: apr) / (原本值: p)
HKEY_CURRENT_USER\ControlPanel\Sounds\RingTone0
Script=(修改值: av0pr) / (原本值: av0pw3r)

8.
防止通話時個SCREEN關閉
HKLM\Drivers\BuiltIn\RIL\BatteryTimeoutInCall
DWord Data (修改值: 0)  /  (原本值: 5)
HKLM\Drivers\BuiltIn\RIL\BatterySuspendTimeoutInCall
DWord Data (修改值: 0)  /  (原本值: 5)
HKLM\Drivers\BuiltIn\RIL\EnableFastDormantDisplayDuringCall
DWord Data (修改值: 0)  /  (原本值: 0)
HKCU\ControlPanel\Phone Sleep
DWord Data (修改值: 0)  /  (原本值: 1)
HKCU\ControlPanel\Backlight\LightSensorPollingEnable
DWord Data (修改值: 0)  /  (原本值: 1)

Tags: dword value, hkey classes root, hkey users, htc Diamond, 修改, 注册表, 钻石

Manila Customizer - Customize Clocks, Icons, Sliders etc

neemem — Sat, 01 Nov 2008 23:22:58 +0800

I decided to write a Manila Customizer that will work Similar to HHC for Kaiser.
The app can be unzipped anywhere but i suggest \Internal Storage\Program Files\ManilaCustomizer

The Clocks are stored in Whatever path\ManilaCustomiser\Clocks
The Icons are stored in Whatever path\ManilaCustomiser\Icons
The Sliders are stores in Whatever path\ManilaCustomizer\Sliders
The TopCurtains are stores in Whatever path\ManilaCustomizer\TopCurtains
The BottomCurtains are stores in Whatever Path\ManilaCustomizer\BottomCurtains

The app will look for a .jpg file in order to be able to display and add a Clock theme and same goes for icons etc
So if you want to add a clock Called FireLighter then simply Create a Folder :

\Whateverpath\ManilaCustomizer\Clocks\Firelighter <-The Folder where the Manila Files are
\Whateverpath\ManilaCustomizer\Clocks\Firelighter. jpg <- The image that will be displayed

Note the Jpeg and the folder has to be the exact same spelling.
If the system finds a .jpg it will look for a folder by the same name and move all those files into \Windows upon selecting the Clock Set.

Same goes for the Icons and all others

There are a few special files in \ManilaCustomizer\*.txt. When an Item is applied the files for the Item (eg Clock) is stored in these files and when a new Item is applied it will first delete the files from the previous Item and then Apply the new Item (was changed to work this way in ver 0.6)

Please give feedback. Thanx

Ok i decided to split it into three parts for now. Application , Clocks, Icons.

So unzip Clocks into WhateverPAth\ManilaCustomizer\Clocks and same with icons

IVe only tested this on original installed black Manila on WWE Rom

Credit goes to the Following People so far who Supplied Clocks and Icons

NisseDILLIGAF
Panosha
lexxirae
ProphecyXR
doc31 - Sticker Icons
skilty - Added a zip file with three new sets of everyting. Very nice

If there are some clocks here that belong to anyone please pm me and ill add your name to the credits

Done :
Clocks \ManilaCustomizer\Clocks
Icons \ManilaCustomizer\Icons
Sliders \ManliaCustomizer\Sliders
TopCurtains \ManilaCustomizer\TopCurtains
BottomCurtains \ManilaCustomizer\BottomCurtains

Please Check Post two. Delete the whole app before reinstalling. Fixed all Clocks etc
Wanna Say Special thanx to NisseDILLIGAF for his help. I dont know much about Manila files but he has helped me a lot

The ManilaCustomizer.Zip file includes 2 samples of every item cause some people dont understand the directory structure to well. Hope this helps

Attached Thumbnails

Attached Files

	BottomCurtains.zip (13.8 KB, 1980 views)
	Sliders.zip (155.1 KB, 2068 views)
	TopCurtains.zip (19.9 KB, 1821 views)
	Clocks.zip (1.07 MB, 2704 views)
	Icons.zip (1.71 MB, 2575 views)
	ManilaCustomizer.CAB (305.7 KB, 2403 views)
	Manila Customizer ver 0.8.zip (13.2 KB, 107 views)

Tags: htc Diamond, internal storage, kaiser, Manila Customizer, storage program

-=® panosha ® =- Shine On 2.4 Light & Full –Diamond WWE ROM

neemem — Sat, 01 Nov 2008 23:20:45 +0800

[ROM][WWE][27.10.08][CE OS 20758] -=® panosha ® =- Shine On 2.4 Light & Full

Shine On 2.4 Light & Full

Shine_On_2.4_LIGHT_Dynamic_pp by koukou

Shine_On_2.4_LIGHT_16MB_pp by koukou

Shine_On_2.4_FULL_Dynamic_pp by koukou

Shine_On_2.4_FULL_16MB_pp by koukou

Shine On 2.4 Light Dynamic pp filefactory

Shine On 2.4 Light 16MB pp filefactory

Shine On 2.4 Full Dynamic pp filefactory

Shine On 2.4 Full 16MB pp filefactory

Shine On by bl0w

First you must flash HardSPL Developer Edition from here thahks to cmonex. After unzipping the file you have downloaded, you must run from your desktop PC the ROMUpdateUtility.exe with your device synchronizing and the battery above the 50%. Follow the instructions on the screen. For flashing from Internal Storage, please use the procedure described by suiller http://forum.xda-developers.com/show…postcount=4035

Please use this Weather Database Editor http://forum.xda-developers.com/show…8&postcount=33

Tags: diamond, internal storage, Rom, synchronizing, WWE, xda developers

Linux / Android on HTC Diamond

neemem — Sat, 01 Nov 2008 23:15:04 +0800

在钻石机上也可以跑 android了…哈哈…

参考以下:

First off credits goto all those working hard and having sleepless nights, people like: dcordes, netripper, druidu and all those I didnt mention!

I have just made this thread to get developers a kickstart, so that they dont have to read hundreds and hundreds of posts.

==========
IRC: #htc-linux @ Freenode
==========

Getting the kernel (taken from http://forum.xda-developers.com/show…84#post2269384 … credits to dwaradzyn):

Code:

mkdir ~/android
cd ~/android
git clone git://git.linuxtogo.org/home/groups/mobile-linux/kernel.git
cd kernel
git checkout -b htc-msm-2.6.25 origin/htc-msm-2.6.25
cd ..
wget http://www.codesourcery.com/gnu_toolchains/arm/portal/package2549/public/arm-none-linux-gnueabi/arm-2008q1-126-arm-none-linux-gnueabi-i686-pc-linux-gnu.tar.bz2
tar xjf arm-2008q1-126-arm-none-linux-gnueabi-i686-pc-linux-gnu.tar.bz2
cd kernel
make htckaiser_defconfig ARCH=arm
export PATH=~/android/arm-2008q1/bin:$PATH
make zImage ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi-

Now the file ~/android-kernel/kernel/arch/arm/boot/zImage is ready to be put on your phone and you can boot it with haret’s newest version (1.5.2 works fine) … downloadable from: http://www.handhelds.org/~koconnor/haret/

Open your favourite text editor to create the file “DEFAULT.txt” and put the following in it:

Code:

set MTYPE 1910
set KERNEL zImage
set INITRD android.bin
set RAMSIZE 0x5e
set RAMADDR 0x10000000
set cmdline "root=/dev/ram0 rp init=/init console=tty0 mem=94M"
bootlinux

Get the file android.bin from http://h3po.de/public/diamond_android_0.8.zip and put it in the same directory as haret.exe, default.txt and zImage.

=====

Now the new points of attention are:

1. Touchscreen calibration:

I have seen people talking about a red dot in the upper left corner, I have seen it once so far and didnt notice any major miss calibration when using the dev tools > pointer locator … the only this malfunctioning is the x inversion and that you need to double tab (or is this standard behaviour? It looks like it remembers the last pressed location). Also the onscreen keyboard is very flickery, minor issue should be easy to fix (during loading it looks like it is flickering on the readout of the touchscreen).

2. Hardware support:

Adding various support for hardware, to output sound and all other “required to call” fuctionality.

Also not forgetting to access internal memory, maybe the best workaround to loading a fully fledged Android is to make a minimal initrd to setup internal storage and from there load the rest. Should be much easier when it all gets incorporated into a ROM, instead of loading with haret … which poses serious problems regarding initrd loading and who wants WM6x/7 on his phone anyway when Android becomes usable. Loading from haret does make working with it for now a little easier. Maybe a GRUB like approach and loading straight from a filesystem (ROM or internal storage)?

==========

Some other request:

Pointers to Android OS sources or atleast a working 1.0 (latest branch?) initrd.

==========

General tips:

Going back to desktop: insert and remove stylus.
Selecting and opening, use double tabbing and mirror x for now.

Using onscreen keyboard: havent figured it out yet sadly.

=========

Ill try to update the post, also PLEASE people refrain yourself from posting in this thread … let’s make a good go at keeping it clean. If you do not intend to be working on getting Linux / Android to work on the Diamond and family please post somewhere else. No harsh feelings, but threads getting cluttered with “Great work!” and “wehn iz android really workn on me phone?” do mess things up by quite a bit.

DO NOT ASK FOR REQUESTS, focus is on the basics first … input, output and storage.

==========

Dont forget to check: http://wiki.xda-developers.com/index…e=RaphaelLinux

==========

Developers, please post updated links / patches and all that would help us make progression.

Tags: Android, calibration, developers, htc Diamond, inversion, kickstart, linux, sleepless nights, 钻石

Linux on Raphael and Diamond (maybe Android)

neemem — Fri, 31 Oct 2008 16:57:45 +0800

This page is meant for people that want to know the progress on getting linux to work on the Raphael and Diamond devices. It was suggested in this thread to make a wiki page, which I found to be a good idea. We’re on this with some great people now. In case you feel you can help out, you can find us on #htc-linux on Freenode.

Last yesterday evening/night dcordes took the lead in merging my (netripper) code and druidu’s code and shape it into a decent package. pH5 has added a branch for us on linuxtogo git to make life easier. Branch is named htc-msm-2.6.25. It’s a direct copy of the android-msm-htc-2.6.25 branch that is available on git.android.com. A machine definition has been added (HTCRAPHAEL) which will both boot the Raphael and Diamond, so when booting with haret, use mtype 1910 from now on. To get started, you can refer to the kaiser kernel building instructions. Make sure to rename ‘htc-msm’ in that guide to ‘htc-msm-2.6.25′.

Here’s a link to the .exe that boots this kernel for both Raphael and Diamond, and find the non-linload version here. When you use the latter one, modify the default.txt to change last line from ‘ramboot’ to ‘bootlinux’.

Note that this version is just a cleanup and a bit of stability improvement - no new spectacular things.

Tags: Android, diamond, kaiser, kernel, linux, raphael

apache2 ssl配置方法（转载）

neemem — Wed, 29 Oct 2008 16:56:44 +0800

系统：RH9.0 AS3.0
软件包：httpd-2.0.50.tar.gz
openssl-0.9.7d.tar.gz
ssl.ca-0.1.tar.gz

安装过程

1安装openssl-0.9.7d
#tar zxvf openssl-0.9.7d.tar.gz
#cd openssl-0.9.7d
#./config
#make
#su
#make install

默认的安装是将openssl全部安装在 /usr/local/ssl 目录下面，所以编译apache的时候，需要指定ssl的目录：–with-ssl=/usr/local/ssl ，因为它在编译的时候要用到openssl提供的头文件和库。

2.安装httpd-2.0.50
#tar zxvf httpd-2.0.50.tar.gz
#./configure –prefix=/usr/local/apache2 –enable-so
–enable-ssl=static –with-ssl=/usr/local/ssl –enable-mods-shared=all
#make
#make install

安装的openssl默认是没有编译成动态链接库的，因为其文档说openssl的动态链接库还不成熟，可以使用 ./config shared 编译带动态链接库的openssl，但是还处于试验阶段。
解决这个问题的办法是：将mod_ssl静态的编译到apache里面。

3.制作证书
可以用来生成ssl所用到的证书。
现在没有这个工具了，只能自己动手生成了，对证书不熟悉的人，有一个工具可以使用：http://www.openssl.org/contrib/ssl.ca-0.1.tar.gz
#cp ssl.ca-0.1.tar.gz /usr/local/apache2/conf
#cd /usr/local/apache2/conf
#tar zxvf ssl.ca-0.1.tar.gz
#cd ssl.ca-0.1
#./new-root-ca.sh (生成根证书)
No Root CA key round. Generating one
Generating RSA private key, 1024 bit long modulus
………………………++++++
….++++++
e is 65537 (0×10001)
Enter pass phrase for ca.key: (输入一个密码)
Verifying - Enter pass phrase for ca.key: (再输入一次密码)
……
Self-sign the root CA… (签署根证书)
Enter pass phrase for ca.key: (输入刚刚设置的密码)
……..
…….. (下面开始签署)
Country Name (2 letter code) [MY]:CN
State or Province Name (full name) [Perak]:GuangDong//随你喜欢
Locality Name (eg, city) [Sitiawan]:GuangZhou//随你喜欢
Organization Name (eg, company) [My Directory Sdn Bhd]:GDLC//随你喜欢
Organizational Unit Name (eg, section) [Certification Services Division]:GDLC//随你喜欢
Common Name (eg, MD Root CA) []:winson CA//随你喜欢
Email Address []:yu.hanhui@gd-linux.org//随你喜欢
这样就生成了ca.key和ca.crt两个文件，下面还要为我们的服务器生成一个证书：
# ./new-server-cert.sh server (这个证书的名字是server)
……
……
Country Name (2 letter code) [MY]:CN
State or Province Name (full name) [Perak]: GuangDong
Locality Name (eg, city) [Sitiawan]: GuangZhou
Organization Name (eg, company) [My Directory Sdn Bhd]:GDLC
Organizational Unit Name (eg, section) [Secure Web Server]:GDLC
Common Name (eg, www.domain.com) []:localhost
Email Address []:yu.hanhui@gd-linux.org
这样就生成了server.csr和server.key这两个文件。
还需要签署一下才能使用的：
# ./sign-server-cert.sh server
CA signing: server.csr -> server.crt:
Using configuration from ca.config
Enter pass phrase for ./ca.key: (输入上面设置的根证书密码)
Check that the request matches the signature
Signature ok
The Subject’s Distinguished Name is as follows
countryName :PRINTABLE:’CN’
stateOrProvinceName :PRINTABLE:’JiangSu’
localityName :PRINTABLE:’NanJing’
organizationName :PRINTABLE:’Wiscom System Co.,Ltd’
organizationalUnitName:PRINTABLE:’ACSTAR’
commonName :PRINTABLE:’acmail.wiscom.com.cn’
emailAddress :IA5STRING:’acmail@wiscom.com.cn’
Certificate is to be certified until Jul 16 12:55:34 2005 GMT (365 days)
Sign the certificate? [y/n]:y
1 out of 1 certificate requests certified, commit? [y/n]y
Write out database with 1 new entries
Data Base Updated
CA verifying: server.crt <-> CA cert
server.crt: OK
(如果这里出现错误，最好重新来过，删除ssl.ca-0.1这个目录，从解压缩处重新开始。)
下面要按照ssl.conf里面的设置，将证书放在适当的位置。
# chmod 400 server.key
# cd ..
# mkdir ssl.key
# mv ssl.ca-0.1/server.key ssl.key
# mkdir ssl.crt
# mv ssl.ca-0.1/server.crt ssl.crt
然后就可以启动啦！
# cd /usr/local/apache2
# ./bin/apachectl startssl
对于这个提示：
httpd: Could not determine the server’s fully qualified domain name, using 127.0.0.1 for ServerName
只需要编辑httpd.conf,找到ServerName xxxx这一行，去掉前面的注释即可。

浏览器https://127.0.0.1
成功！！

Tags: apache, modulus, openssl

Neemem's Blog

钻石注册表修改及一些测试过的软件

Related posts

Manila Customizer - Customize Clocks, Icons, Sliders etc

Related posts

-=® panosha ® =- Shine On 2.4 Light & Full –Diamond WWE ROM

Related posts

Linux / Android on HTC Diamond

Related posts

Linux on Raphael and Diamond (maybe Android)

Related posts

apache2 ssl配置方法（转载）

Related posts